Latest Blog Posts Latest Blog Posts

Technical Info

H.264

It refers to the compression encoding of video footage. H 2.64 protocol it is the most recent compression protocol and delivers of high quality recorded and transmitted images.

Video Inputs

Displays the maximum number of cameras that can connect to the system.

Remote Control

Includes remote control for the standalone DVR.

Mobile View

The system has the ability to transmit images to mobile phones and smartphones.

PTZ

Control of PTZ cameras can be achieved through RS-485 port for speedome cameras.

SATA HDD

It is the maximum number of HDD that can be supported by a system.

Alarm Output

The number of alarm output that a system supports giving the ability to control devices such as lights, doors and other devices.

TV OUT

Connectivity to monitors it’s possible using TV OUT port for monitoring cameras.

Record Resolution
Common recorded resolutions are D1: 720x576pixel, 4CIF: 704x576pixel,

CIF: 352x288pixel. For the SDI Megapixel cameras the resolution is refered as 720p, 1080p that correspond to 1.3Mp and 2Mp.

eSATA

Support of external HDD of eSATA technology for exporting video data.

ICR

Mechanical filter which is in front of the CCD sensor and isolates the IR Light during day for better color reproduction.

IR LED

A light-emitting diode (LED) is a semiconductor device that emits IR light which is not visible to human eye. It is commonly in CCTV since it allows to capture high quality images during night.

OSD MENU

There is the ability to change the camera settings by using electronic menu which is displayed at the video.

VANDAL-PROOF

Special design cameras for increased resistance to hits and vandalism.

WDR

Provides clear images even to cases where too much light alternates or there is direct light in front of the camera.

HSBLC

Allows license plate recognition during night reception.

WHITE BALANCE

Auto setup of white shade depending by the type of the camera installation (indoor - outdoor)

EXTERNAL CONTROL

Easy external control of the lens for focusing the image.

HLC

It recognise highlight sources (i.e. car lights) and isolates them so that will allow the camera to have better quality images.

2D-NR

Digital filter for eliminating image noise during night.

SENS UP

Digital enhancement of brightness during low light condition.

BLOWER

Includes blower into the casing of the camera that cool the electronics components in case of high external temperature.

HEATER

Includes heater that prevents the camera from freezing in case of low external temperature.

ATR (Adaptive Tone Reproduction)

Option in cameras for improving brightness and contrast in cases of low or high light conditions.

SMPTE 292M

It is a standard for digital and uncompressed image transmission (SDI Cameras) over coaxial cable for high quality images.